Electric Multifunction Tool 900W

This 900W electric multifunction tool combines four functions: hedge trimmer mode, pruner mode and brushcutter/edge trimmer mode.

Switching from one function to another is quick and easy, thanks to a push-fit system.

Hedge trimmer mode:

The pole-mounted hedge trimmer is ideal for maintaining hedges and shrubs. For fast, precise cutting, it has a double mobile blade 480mm long, so you can cut in opposite directions on either side. The blades can be swivelled up to 90°, and you can adjust the angle of inclination using the lever on the hedge trimmer arm.

The tool is equipped with an electric braking system that stops the cutting blade quickly when switched off.

Pruning mode :

The pole pruner is fitted with a 200mm-long chain guide and a chain. The chain is adjusted using the built-in tensioning screw. 

With a cutting length of 180mm, it is ideal for cutting branches and twigs from the ground. The pruner has a 120 ml oil tank for chain lubrication. 

This practical 4-in-1 tool comes with a 50cm extension to extend the pruning attachment or hedge trimmer to reach the highest parts of hedges and trees. With the extension mounted on the machine, it reaches a total length of 1.90m in hedge trimmer mode and 1.70m in pruner mode.

Brushcutter and edger mode: 

In brushcutter mode, this electric tool cuts grass and undergrowth.

The multifunctional 3-tooth blade cuts small shrubs and other thick vegetation.

The double-wire nylon cutting head with 420mm diameter cutting capacity is ideal for trimming unsightly weeds and thick grass along borders, fences, walls and around trees. The cutting head automatically extends both wires.

When the machine is running, lightly press the cutting head against the ground and the wires will automatically extend. The length of the wires is automatically adjusted by the blade of the protector.

The universal brushcutter head has an aluminium body for extreme resistance to wear and tear.

The universal brushcutter head is suitable for many manufacturers of brushcutters and straight-arm multifunction tools. The two washers, 8mm and 10mm inside diameter, ensure that the head is correctly tightened to match the diameter of the machine shaft. The tightening key ensures the head is installed correctly.

Supplied with 2.4mm diameter rigid nylon cutting wire, 15m long in all. The rounded head outlet reduces wire wear. The head can be unscrewed by hand, so you don't need any tools to install or change the wires. 

With the tool running, the cutting head is automatically adjusted by tapping.

This type of head makes it easy to cut grass and weeds around trees, along walls or edges. 

The multifunction tool has been designed for easy handling: it has a non-slip rear handle. The front hand guard provides a firm grip on the machine.

The rear-mounted motor distributes the weight evenly during work.

The tool comes with a length-adjustable harness for easy, effortless manoeuvring. For added safety, the carabiner is fitted with a quick-release device, simply by pulling the fabric tab.

The machine can be started in complete safety thanks to the dual-contact start system. The safety button must be pressed before the on/off trigger can be activated.

Gardener's opinion

This electric multifunction tool is ideal for all-round maintenance of a small garden. The tools for the various functions are easy to change.